Learn how to build this set of Easy DIY Barn Doors with free how-to video and easy-to-follow plans by Shanty2Chic!

Being at home a lot lately, has me wanting to redo lots of things in my house! One of the first is the old set of barn doors that I built for the media console I designed a few years ago. The doors were beautiful but I think with the weight, over the years, one of the wheels stopped spinning. I was ready for a refresh so it was a good excuse to build a lighter-weight, new set of doors. I am LOVING the new look of my Easy DIY Barn Doors and I’ve got the how-to video and free plans for you to build your own! This is a very simple build, you only need a few tools and it is easy to customize to fit any space in your home! Now, let’s get to building! You can watch the how-to video by clicking in the box below and follow along with the how-to tutorial!

Click here to jump to the free printable plans!

How to Build Easy DIY Barn Doors

Tools:

  • Miter Saw
  • Table Saw (optional)
  • Kreg Jig
  • Drill
  • Brad Nailer
  • Pin Nailer (optional)
  • Stapler (optional)

Supplies

Step 1: Building the Frame

Cut the back frame boards to size and use a Kreg Jig to drill 3/4″ pocket holes at both ends of the short frame boards.

Attach the long frame boards to the short frame boards with 1 1/4″ pocket hole screws and wood glue.

The outside frame should look like this now.

Cut the middle frame board to size. Drill 3/4″ pocket holes at both ends and attach it to the center of the short frame boards with 1 1/4″ pocket hole screws and wood glue.

Cut the plywood to size, flip the frame over and attach the plywood to the frame with 5/8″ staples and wood glue.

Step 2: Adding the Decorative Trim

Cut the front outside trim to size and attach them to the front of the plywood with 1/2″ pin nails and wood glue.

Cut the top and bottom, middle pieces of trim. Center them on the door and attach them with 1/2″ pin nails and wood gluel

Cut the short horizontal trim pieces to size. Attach them at the top of the vertical pieces with 1/2″ pin nails and wood glue.

Cut the long vertical trim piece to size and attach it at the ends of the horizontal pieces with 1/2″ pin nails and wood glue.

Cut the short horizontal trim pieces to size and attach them 4″ from the ends of the long vertical piece. Use 1/2″ pin nails and wood glue.

This is what the door should look like once all of the decorative trim is attached!

Step 3: Attaching the Outside Trim

Cut the side trim pieces to size. Attach them to the sides of the barn door with 1 1/4″ brad nails and wood glue. The front of the trim pieces should be flush with the front of the trim on the barn door.

Cut the top and bottom trim pieces to size. Attach them to the ends of the barn door with 1 1/4′ brad nails and wood glue. The bottom and top trim boards should be flush with the side trim boards.

Step 4: The Finish

I built the second door, filled my nail holes and gave them both a good sanding!

Once I filled the nail holes and sanded the doors down, I applied two coats of paint!

  • I used Seine by Valspar for the paint!

Step 4: Hang the Doors

I left the original barn door track, guides and handles but added new wheels!

I am LOVING how the new doors look on my media console! I love the added modern touch and the contrast of the gray paint!

Make sure to share your builds with us on social media and use #shanty2chic so we can share them too!

Easy DIY Barn Doors

Learn how to build these Easy DIY Barn Doors with free plans and a how-to video by Shanty2Chic! Download the full set of Free Printable Plans HERE!

  • Miter Saw
  • Table Saw (optional)
  • Drill
  • Kreg Jig
  • Pin Nailer (optional)
  • Stapler (optional)
  • Brad Nailer
  • Sander
  • 4 1x4x8 Whitewood or Common Boards
  • 3 1x2x8 Whitewood or Common Boards
  • 9 1/4″x3x48″ Craft Boards (poplar or similar)
  • 1 1/4×48″x96″ Hardwood Plywood

Cut List

  • Cut List 1

  • Cut List 2

  • Cut the back frame boards to size and drill 3/4″ pocket holes at both ends of the short frame boards. Attach the long frame boards to the short frame boards with 1 1/4″ pocket hole screws and wood glue.

  • Cut the middle frame board to size. Drill 3/4” pocket holes at both ends and attach it to the center of the short frame boards with 1 1/4” pocket hole screws and wood glue.

  • Cut the plywood to size, flip the frame over and attach the plywood to the frame with 5/8″ staples and wood glue.

  • Cut the front outside trim pieces to size and attach them to the front of the plywood with 3/4″ pin nails and wood glue.

  • Cut the purple trim pieces to size and attach them to the center of the plywood with 1/2″ pin nails and wood glue.

  • Cut the pink trim pieces to size and attach them to the ends of the purple pieces with 1/2″ pin nails and wood glue.

  • Cut the orange trim to size. Attach it to the ends of the pink trim pieces with 1/2″ pin nails and wood glue.

  • Cut the red trim pieces to size and attach them 4″ from the ends of the orange trim piece. Attach them with 1/2″ pin nails and wood glue.

  • Cut the side trim pieces to size. Attach them to the sides of the barn door with 1 1/4″ brad nails and wood glue. The front of the trim pieces should be flush with the front of the barn door trim.

  • Cut the top and bottom trim pieces to size and attach them to the ends of the barn door with 1 1/4″ brad nails and wood glue. The end trim boards should be flush with the side trim boards.

  • Now it’s time to fill all of the nail and staple holes with wood filler. I also added wood filler to the cracks where the trim boards were touching. Sand it down and give it a finish!

    Make sure to share your builds with us on social media and use #shanty2chic so we can share them too!