Build a folding craft table or foldable desk with storage! Inspired by the IKEA Norden gateleg table, this folding desk is a great option for a small craft space or home office. Better yet, it can be built using only scrap wood!
For more space-saving furniture for small rooms, build a ladder chair folding step stool or corner shelf and cabinet. Also, learn how to install a pocket door or rolling barn door to free up floor space.
I have a been working on building a few different things the past few months. One of the projects was this handmade FarmHouse Table with Apron and Corner Brackets, and my today’s post – Folding Craft Table with Storage.
Re-using most of the wood I work with is very important to me, and wood is a great material to work with – I always find a way to reuse boards or smaller cuts. But of course, you can buy lumber to build this foldable desk, too.
Folding Craft Table with Storage Shelves
Inspired by the IKEA Norden gateleg table design, this folding craft table has 2 folding gateleg table sections, with a center fixed section that features 2 easy-slide storage shelves. The shelves fit most sewing machines, making this a great sewing room table for those who use a spare room or guest room as an office or craft room!
Dimensions & Features
The gateleg desk overall dimensions are: 66 1/4” W x 26 1/2” D x 29 1/2” H
This folding table with storage features 2 – 26 ½’ gateleg drop-down table sections with a narrow 2-shelf 13 ¼” wide storage area in the center that will fit most sewing machines.
The shelves use a support with the plywood shelf set on top — this method will give you the great “no edge” look – perfect for sliding things in and out!
I made this foldable craft table from scrap wood only, all I spent on this project was $5.00 for the hinges. Everything else I had already, or received for free. See below for tips on using scrap wood to build this desk and save money!
If you were to buy all the needed material and hardware, this folding desk would only cost about $90 in materials — making it a great option for a DIY desk under $100!
Using scraps and leftover pieces of wood is a great way to reduce the cost of your DIY folding desk while also reducing the size of your scrap pile.
The 26 1/2″ square gateleg table pieces are a great size to use leftover plywood scraps, and the 1×2 and 2×2 materials for the table frame can be scraps from other projects.
You can also create your own 1×2 and 2×2 boards by ripping down 2x4s and other wider lumber using a table saw.
This project is somewhat advanced, but I am pretty sure that even a beginner will pull this off by using my printable PDF woodworking plans.
Necessary skills to build your own folding gateleg table:
- Basic woodworking skills, including how to read a cut list/diagram, how to measure and cut accurately and how to check/adjust for square
- How to use a pocket hole jig to attach boards
This post contains affiliate links. Learn more and read our full disclosure policy here.
This material list is also included in the printable PDF woodworking plan for your convenience. The 10-page plan also includes a detailed cut list and assembly instructions.
Note: This material list assumes buying all new lumber, but this is a great project to use scraps of plywood and other lumber. Frame boards (2×2, 1×2, and ¾” boards) can be ripped from wider lumber using a table saw. See tips for ripping boards here.
Building a Folding Desk or Craft Table
The printable woodworking plan contains all the steps needed to build this IKEA inspired gateleg table. Just download and print the plans from the shop, then you’re ready for a trip to the lumber store to get started building!
This table is fairly lightweight and easy to move, and you can make the table even more portable by attaching leg casters to the bottom of the table base and to the gateleg support frame(s) left and right. Use these Slipstick floor protectors or Soft Rubber Swivel Plate Caster and these for the side frame > Kick Down Doorstop.
For a nice finishing touch, I used Birch wood edging tape to hide all the ugly edges from the table top (if you can’t find the 1/2″ tape, you can cut the tape to fit your needs).
More ways to build your own space-saving table and storage:
I would be very grateful if you would also share this tutorial on Pinterest or Facebook.
Like to see more from Betty:
Published 26 Aug 2015 // Updated 4 Jun 2020
Filed Under: $20 to $250, Beginner, Build, By Cost, By Level, By Material, By Tool, Contributor, DIY, DIY Project Plans, Furniture Building Projects and Plans, How To, Intermediate, Miter Saw, Pocket Hole Jig, Sketches/Renderings, Tables, Tutorials, Wood and Plywoods Etc. Tagged: budget-friendly, craft, craft space, desk, desk ideas, DIY, Furniture, handmade, ikea, ikea hack, plywood, tutorial, Wood, woodworking, woodworking plans
Betty is a “stay at home mom” by day, an aspiring entrepreneur, crafter, DIYer and blogger by night. She loves to share budget-friendly home improvements, fun DIY projects and nifty, thrifty makeovers with you on her blogOh Everything Handmade.
Molly is a farmhouse-obsessed DIYer who likes her dogs and long walks on the beach. Find more of her shiplap and burlap style at MyWebsite.com.